Ionizer Armor® easily snaps on your cold water line under the sink, as the cold water passes through the directional magnetic field of the Armor, the water goes through some very advantageous changes.

1. The ability of scaling minerals to stick anywhere is dramatically reduced. Our in-house testing has shown a 40-60% reduction in scale buildup, not only in the plate cell but inside the entire machine.

2. Scaling minerals are abrasive.  This abrasiveness is extremely hard on the platinum coating on your plates, this is why ionizer plates last a lot longer in “soft water” conditions. After passing through the Ionizer Armor®'s field, these minerals become far less abrasive protecting the plate coating in the process!

3. Lower surface tension! Yes, Ionizer Armor® can achieve minor micro-clustering of the water even before it enters the ionizer! This gives you even more absorbable water than with an ionizer alone.

4. No more white flaky buildup in glasses and containers. This is a common complaint of ionized water users. Because ionized water is rich in minerals, when the water dries up in a container you will see the dried up mineral deposits. Not with the Ionizer Armor® in place, your glasses and containers will remain clear!

5. Improved water frequency. There’s a lot of buzz lately about vibrational frequencies and health, most of us have seen the EMF necklaces and Q ray bracelets for years now--some ionizer brands have even added laser lights and other methods to the ionizers to improve the healthy vibrations of the water. These are new methods and while they may prove beneficial they give you more parts that can fail inside the ionizer. Ionizer Armor® is a lifetime warranty product that installs outside the ionizer and has a 50 year track record (magnetic field water treatment) for safety and effectiveness. After eight years of testing (as of 2012) we have seen better health results from customers using the Ionizer Armor® with their ionizers.

6. Silky smooth texture of the water. Water that has been through the Ionizer Armor®'s field has a noticeably silkier feel in the mouth. Try this experiment: Before installing the Ionizer Armor®, pour a large glass of ionized water. Then install the Ionizer Armor®, run machine for approximately 20 seconds and then fill another large glass. Taste both waters and you will “feel” the difference in your mouth!

How does it work?

As water molecules pass by the powerful, highly focused magnetic field, two things happen: molecules are polarized (organized) and the water takes on a net positive (+) charge. This physically changes the water's molecular structure. The result is soft water characteristics with dissolved minerals, which will protect your water ionizer investment.

High Magnification Pictures of A Water Droplet with and without Ionizer Armor

Photos taken in the nuclear biochemistry deptartment of a major university.

Acid Water w/o Ionizer Armor	Alkaline Water w/o Ionizer Armor	Alkaline Water with Ionizer Armor

What is clearly visible is that the ionized water's rise off of the glass slide in a 75 degree angle, while the Ionizer Armor water rises as a 90 degree angle. Researchers all over the world believe that water that has a 90 degree angle is more probable to form hexagonal clusters, which penetrate cells better and are considered more ideal for health. You should also notice that the Ionizer Armor droplet of water is more dense than the regular ionized water, which illustrates the silkier feeling that those who drink Ionizer Armor water experience.

Beware of imitators and knock offs!

We are the first and the original--no one else even compares. We tested various strengths (Gauss) and directional magnetic field products for over five years before choosing the current Ionizer Armor®'s strength level and field direction. Some of the strengths and direction combination we tested actually caused more scale to buildup inside the machine, while some created no results at all. When choosing this type of product don’t settle for scam artist versions or cheap knock offs, insist on the first, the original and the highly field tested IONIZER ARMOR®.

Warranty:

Ionizer Armor® is built to last. Should the front and back sections ever fail to snap together, mail the unit back to the dealer and it will be replaced free of charge. Ionizer Armor® is made in the USA.

Warning: Ionizer Armor® is not a simple magnet, it is an engineered, studied and field tested product that uses a precise and directional field to achieve its superior results, taping a magnet on the water line will not come close to producing the same results and could cause damage to you or your machine. Trust us, we’ve tried it.